Dual Cotag Reader Module. For connection of up to two Cotag reading heads i.e. PR100, HF100 or 270 Loop Coupler.

The 4322 can occupy any of the top four slots in a 4101 controller (must be equipped with a 4210 RF module) and can also be used in a 4010-CNP controller as an expansion module.

· PCB card utilising 64 Pin DIN41612 Plug

· Connections for two Cotag technology reading heads - PR100, HF100 or 270 Loop Coupler.

· Single Pole change over relay for each reader

· LED outputs for Red Amber and Green indicators - open collector

· Local warning output - open collector

· Inputs for Door open and Egress - 4 state monitored

· Plug for 4988 DPDA allowing connection of two "BCLINK" PINpads

Dual Cotag Reader Module. Provides connection for up to two Cotag reading technology reading heads i.e. PR100, HF100 or 270 Loop Coupler

The 4322 can occupy any of the top four slots in a 4101 controller (must be equipped with a 4210 RF module) and can also be used in a 4010-CNP controller as an expansion module. Note it cannot be used in a swipe verion of a 4010 controller i.e. 4010-SNP.

A single pole change over relay is provided for each reader as well as open collector outputs for Red, Amber and Green LED's plus local warning. Inputs provided for each reader are Door open and egress both of which are 4 state monitored providing the correct terminating impedances have been applied.

An additional plug is provided allowing the installation of a 4988 DPDA which can interface two "BCLINK" equipped PINpad readers.